|
VTL TL-7.5
Reference Series II
SOLD $20,000.00
NOV
2010
Stereophile Review
6 Moons Review
Manufacturer's Website
-
Tube complement:
2 - 12AU7 tubes
-
Fully
differential circuit with balanced in and out with
mirror-image layout
-
Isolated Control
Unit chassis with 12 separate fully regulated power
supplies
-
Separate Audio
Unit chassis with zero internal digital activity
-
Low noise
processor control design for all functions
-
Simple circuit
topology with low negative feedback for musical
purity
-
Logical sequenced
soft-start power up for extended tube life
-
Ultra low
impedance output stage to drive any length of cable
and any power amplifier
-
Shock-mounted
gain stage
-
Modular volume
control and output stages
-
All Infini and
Multicaps in signal path
-
95-step 70dB
discrete relay attenuator for all attenuation
functions
-
Processor loop –
any of 8 inputs can be assigned as fixed unity gain
pass through
-
Tape monitor
function for both tape loops
-
4 separately
programmable trigger outputs
-
Programmable
input offsets
-
Selectable padded
inputs
-
Rear IR receiver
for all functions
-
Rigid Combination
steel and non-magnetic chassis and machined
aluminium remote wand

The World's Best Line Stage...?
Yes quite possibly.

Dual chassis design with separate
Power Supple / Audio Circuit configuration.

Timeless and a beautiful design
with attention to detail everywhere you look.

When in actual use the two
chasses cannot be stacked on top of each other!
So you must reserve sufficient
space to either put the two units side-by-side or on separate rack
shelves with adequate ventilation above and to the sides.

Running a dual mono SCSI
Certified Interface Bus System to connect the two chasses together.
Overkill, you bet and you
couldn't get more serious if you tried.

Power Supply Chassis.
With count them, 12 separate fully regulated power
supplies.
Oh My God.

The ultimate in precision
engineering with a cost no object agenda.

Audio Circuit Chassis.
Tube complement:
2 - 12AU7 tubes

Pure Analogue.

Dual SCSI Certified Interface Bus
System Leads
Power Link Lead
Furutech Power Lead (Sold
Separately)
| Vacuum
Tube Complement: |
2 x 12AU7
|
| Inputs:
|
4 pairs
balanced/XLR or RCA single-ended 4 pairs single-ended/RCA
|
| Outputs:
|
2 pairs
balanced out 2 pairs single-ended RCA out 2 pairs single-ended RCA buffered Tape Out
|
| Remote
control functions: |
Power Source Select Volume up/down Mute Fade Balance Control Phase Reverse
|
| Gain
|
20 dB
|
|
Output Impedance:
|
25 Ohms
(Max 150 ohms at 10Hz) |
| Input
Impedance : |
50K Ohms
(20k ohms min) |
| Frequency response + 0 - 1 dB:
|
1 Hz -
100KHz (20Hz – 100kHz +0–1dB into 600 ohms with
900pf 20’ interconnect cable) |
| Maximum
Output Voltage < 1% THD: |
45 Volts
10Hz – 200kHz into 600 ohms at 1%THD
|
| Channel
Separation: |
> 100 dB @
1KHz (>80 dB @ 20kHz) |
| Power
Consumption: |
150 Watts
|
| Dimensions (W x D H):
|
Control
chassis 17.5 x 17.5 x 4 inches 44.5 x 44.5 x 10.2 cm Audio chassis 17.5 x 17.5 x 6 inches 44.5 x 44.5 x 15.3 cm
|
| Weight:
|
75 lbs (34
Kg) Fully packed |
| Channel
to channel cross-talk: |
>100dB
(>80dB at 20kHz) |
|