Mark Levinson No.332

 

SOLD $7,500.00

OCT 2009

 

  • Mint Condition

  • 200WRMS/CH @ 8 OHMS

  • Made In U.S.A.

  • Original Box

  • Worldwide Shipping

Mark Levinson No.332 Owner's Manual

Hi-Fi Review

 

Specifications

 N333 Rated power output: 300 w/ch continuous rms power @ 8Ω

600 w/ch continuous rms power @ 4Ω

1200 w/ch continuous rms power @ 2Ω

 N332 Rated power output: 200 w/ch continuous rms power @ 8Ω

400 w/ch continuous rms power @ 4Ω

800 w/ch continuous rms power @ 2Ω

 N331 Rated power output: 100 w/ch continuous rms power @ 8Ω

200 w/ch continuous rms power @ 4Ω

400 w/ch continuous rms power @ 2Ω

all above power ratings from 20 Hz20kHz at <0.5% THD

 Frequency response: within 0.1 dB from 20 Hz to 20 kHz

 Signal to Noise ratio (main outputs): better than 80 dB (ref. 1 w)

 Input impedance: 100kΩ (balanced)

50kΩ (single-ended)

 Voltage gain: 26.8 dB

 Input sensitivity (2.83V output): 130 mV (all models)

 Input sensitivity (full output): 2.25V for N333

1.80V for N332

1.30V for N331

 Power consumption (N333): 350W (5%) at idle, 200W (5%) in standby

 Power consumption (N332): 325W (5%) at idle, 200W (5%) in standby

 Power consumption (N331): 260W (5%) at idle, 110W (5%) in standby

 Mains voltage: determined by the needs of country for which

the unit was manufactured; cannot be reset by dealer or user

 Overall dimensions: See Dimensions

 N333 Shipping weight: 150 lbs. (68.2kg) each

 N332 Shipping weight: 150 lbs. (68.2kg) each

 N331 Shipping weight: 112 lbs. (50.9kg) each

 Connector complement: four custom binding posts per channel

one 3-pin XLR balanced input connector per channel

one RCA input connector per channel

two 18" mini-jacks for remote turn-on

two Mark Levinson communications ports

one captive high current AC mains cord (N333 only), or

one IEC-standard high current AC receptacle (N332, N331)

 Output impedance: less than 0.05Ω from 2020,000 Hz

 Damping factor: greater than 800, 2020,000 Hz @ 8Ω