|
POWER OUTPUT: 150 watts per channel
into 8 ohms, 300 watts per channel into 4 ohms (1% THD), 600
watts with 2 channels bridged into 8 ohms.
POWER BANDWIDTH: (-3dB points) 5Hz
to 40kHz into 8 ohms, or 4 ohms.
FREQUENCY RESPONSE: (-3dB points at
1W) 5Hz to 120 kHz.
INPUT SENSITIVITY: 1.4V RMS for
rated output (27 dB Gain) single-ended or balanced.
|
|
INPUT IMPEDANCE: 150K ohms
single-ended, 300K ohms balanced differential.
OUTPUT POLARITY: Non-inverting from
single-ended inputs. Balanced pin 2+ (IEC-268).
OUTPUT REGULATION: 0.05 dB 8 ohm
load to open circuit (Damping factor 200).
OUTPUT CURRENT: 20 amps peak at
protective shutdown.
SLEW RATE: 15 volts/microsecond.
(20% maximum duty cycle).
RISE TIME: 2.0 microseconds.
HUM & NOISE: 500mV RMS (96dB below
rated output IHF A-weighted). |
|
POWER SUPPLY CAPACITANCE: 192,000 uF
total.
POWER REQUIREMENTS: 100 -125VAC
60Hz (200-250VAC 50Hz) 400 watts at rated output, (150WPC 8
ohms), 770 watts at 300WPC 4 ohms, 55 watts idle(Model
150M.2).120 watts idle, 1200 watts maximum (Model 150M.7).
DIMENSIONS : 19" (48 cm) W
(standard rack panel) x 7" (17.8 cm) H x 18 1/2 (47.0 cm) D
(front panel back). Output connectors extend 1.0" behind
rear panel.
WEIGHT: 45.8 lbs. (20.8 kg) Net; 64
lbs. (29.1 kg) Shipping. (Model 150M.2). 56.3 ilbs. (25.6
kg) Net: 75 lbs. (34.1 kg) Shipping (Model 150M.7)
Specifications subject to change
without notice. |
