|
Power output |
130 watts per channel into 8 ohms from
20Hz to 20kHz. 230 watts per channel into 4 ohms. |
|
Frequency response |
(-3dB points at 1 watt) 0.4Hz to 300
kHz |
|
Input sensitivity |
3.2V RMS BAL for rated output. (20 dB
Bal gain into 8 ohms) |
|
Input impedance |
300K ohms Balanced, 150k ohms SE |
|
Output regulation |
Approximately 0.05dB 8 ohm load to open
circuit |
|
Damping factor |
Approximately 170 |
|
Hum & noise |
Less than 0.05mV RMS -116dB below rated
output (IHF weighted, input shorted). |
|
Power requirements |
105-125VAC 60Hz (210-250VAC 50 Hz) 500
watts at rated output (130 WPC 8 ohms) 600 watts max, 150 watts
idle. |
|
Other |
Output polarity: Non-inverting.
Balanced input pin 2+ (IEC-268).
Output current: 60 Amps Peak (1 millisecond) |
|
Dimensions |
19" (48.3 cm) W x 6.25" (15.9 cm) H x
15" (38.1 cm) D. Handles extend 1.5" (3.8 cm) forward. |
|
Weight |
42.8 lbs. (19.5 kg) Net; 55.3 lbs.
(25.2 kg) Shipping. |
