|
Frequency response |
+0-3dB, 0.2Hz to 160kHz at rated
output (Balanced, 200k ohms load) |
|
Distortion (THD) |
Less than .01% at 2V RMS BAL
output. |
|
Noise & hum |
1.3uV RMS residual IHF weighted
balanced equivalent input noise with volume at 1 (100 dB below 2V RMS
output). |
|
Gain |
Main output : Selectable for each
input: 24dB, 18dB, 12dB Balanced output. (18dB, 12dB, 6dB SE output.) |
|
|
Record output: 0dB (Processor
input: 0dB balanced.) |
|
Input impedance |
120K ohms Balanced, 60K ohms SE. |
|
Output impedance |
700 ohms Balanced, 350 ohms SE Main
(2). 20K ohms minimum load and 2000pF maximum capacitance. |
|
Output polarity |
Non-inverting. |
|
Maximum inputs |
Low Gain: 48V RMS BAL, 24V RMS SE. |
|
|
Medium Gain: 24V RMS BAL, 12V RMS
SE. |
|
|
High Gain: 12V RMS BAL, 6V RMS SE. |
|
Rated outputs |
2V RMS 1Hz to 100kHz into 200K ohm
balanced load (maximum balanced output capability is 15V RMS at less
than 0.5% THD at 1kHz) |
|
Power supplies |
Electronically-regulated low and
high voltage supplies. Automatic 50 sec. warm-up/brown-out mute. Line
regulation better than .01%. |
|
Tube complement |
(2) 6H30 dual triode. (Hybrid JFET/tube
audio circuit, solid-state power supply). |
|
Power requirements |
105-130VAC 60Hz (210-260VAC
50/60Hz) 50 watts maximum. |
|
Other |
Rotary volume selector (104 steps)
and rotary input selector.
Push buttons: Power, Monitor, BAL/SE, Proc, Mute.
Remote buttons: Display, Bal L, Bal R, Hours, Invert, Gain. |
|
Dimensions |
19" (48 cm) W x 5.25"(13.4 cm) H
(standard rack panel) x 12"(30.5 cm) D. Handles extend 1.50" (3.8 cm)
forward of the front panel. |
|
Weight |
16.5 lbs. (7.5 kg) Net; 26 lbs.
(11.8 kg) Shipping. |
