| Power output |
220 watts per channel into
8 ohms from 20Hz to 20kHz. 380 watts per channel into 4 ohms. |
| Frequency response |
(-3dB points at 1 watt)
0.5Hz to 200 kHz |
| Input sensitivity |
4.0V RMS BAL for rated
output. (20.8 dB Bal gain into 8 ohms.) |
| Input impedance |
300K ohms Balanced, 150k
ohms SE |
| Output regulation |
Approximately 0.07dB 8 ohm
load to open circuit |
| Overall negative feedback |
None |
| Damping factor |
Approximately 130 |
| Hum & noise |
Less than 0.1mV RMS -112dB
below rated output (IHF weighted, input shorted). |
| Power supply energy
storage |
200,000 µF |
| Power requirements |
105-125VAC 60Hz
(210-250VAC 50 Hz) 750 watts at rated output (220 WPC 8 ohms)
1200 watts max (380 WPC 4 ohms) 250 watts at "idle." |
| Tube complement |
(2) 6H30 driver, (2) 6922
voltage amp. |
| Other |
Output polarity:
Non-inverting. Balanced input pin 2+ (IEC-268). |
| Dimensions |
19" (48.3 cm) W x
8.75"(22.2 cm) H x 19.5"(49.5 cm) D. Handles extend 1.5" (3.8
cm) forward. |
| Weight |
58.9 lbs. (26.8 kg) Net;
73.8 lbs. (33.6 kg) Shipping |