Click Above Photo For Additional Images
The classic, graceful appearance of the Aerial Acoustics Model 7B is perfectly complemented by its articulate, full-range sound. Designed with a compact footprint and impeccably finished, the slender column of the Model 7B is ideally suited for listening environments where performance and quality are essential and a refined, understated appearance is valued.
The Model 7B is characterized by a transparent, open, natural sound, with precise imaging and full, expressive bass. Treble response is extended and remarkably smooth. Bass is communicated with power, authority, and character. Unrestrained dynamics and high power handling combine with subtlety and nuance to faithfully reproduce both music and film soundtracks.
An optional base is available.
All Aerial loudspeaker systems are designed and constructed with fanatical attention to quality and detail. Decades of design and manufacturing experience have taught us that craftsmanship and technology go hand-in-hand when creating products of uncompromising performance and genuine long-term value. World class manufacturing techniques and production equipment are employed, complemented by the work of skilled craftsmen when only experienced hands will do.
Aerial Acoustics. Every detail matters.
Frequency Response: 35Hz to 22kHz ±2dB, -6dB at 30Hz Sensitivity: 86dB at 2.83 Vrms and 1.0 meter on axis Impedance: 6Ω nominal, 4Ω minimum, low reactance Power Requirements: 50 to 350 watts (8Ω rating) recommended Woofers: Two 7.1" (180mm) cast magnesium alloy frame drivers
Damped bilaminate composite cones
Large vented magnet structures with long-stroke coilsMidrange: 5" (125mm) cast magnesium alloy frame driver
Damped bilaminate composite cone
Vented magnet structure with linear stroke coilTweeter: 1.0" (25mm) precision titanium dome
Large magnet structure with deep rear chamber
Flared pole vent and 5 surrounding ventsCrossover: 400Hz and 2.7kHz at 24dB per octave
Independent filter assemblies on glass-epoxy PCBs
High-purity copper wiring and silver solder
Premium passive componentsCabinet: Minimum resonance 1" and 2" MDF walls
Extensive internal bracing. Tongue and groove joints
Mirror-imaged matched pairs in architectural veneersConnections: Four gold-plated binding posts with copper jumpers
Bi-wire and bi-amp capableOptional Bases: Rigid 14 lb sand-filled steel bases with spikes Dimensions HWD: 43.0 × 8.5 × 15.5" (1092 × 216 × 394mm) Weight Each: 95lbs (43kg) - 120lbs (55kg) packed